tel: +7 8482 949-122  e-mail: tlt@ekovent63.ru

Ventilators

Modern industrial and domestic fans are powerful climatic modules that can perform several functions simultaneously and maintain a huge area.

Ventilation systems have a lot of modifications. Even more diverse spheres of application, in which a specialized model of industrial ventilation systems demonstrate excellent performance characteristics.

Depending on the application they include in their nomenclature the following types of equipment: axial, centrifugal, roof, channel devices, equipment, ventilation and some other varieties, used in chemical and oil-refining industry. Quality requirements are very high: the performance, sanitary characteristics, the maximum values of the pressure in the system, the maximum permissible level of aggressiveness of the transmitted gas medium, dimensions, as well as many other parameters to be considered in the selection of ventilation equipment for the specific of the climate system.

Centrifugal

  • General exchange
  • Resistant to corrosion
  • Explosion-proof
  • Heat-resistant

Axial

Channel

  • Rectangular
  • Round
  • Roof

Channel fans (straight)

Are intended for installation in a duct of a round or rectangular cross-section. Fans of this type are installed on the same shaft with the electric motor in a single housing with the use of vibroisolation pads. The fan can be axial, многолопастным or radial, with blades curved both forward and backwards, one-sided or double-suction. Housing channel fans can be made of a special plastic material, of galvanized steel and even be mixed. Due to small overall dimensions of the duct fans can be installed directly in the network of air ducts, built-in channel systems of air conditioning and ventilation and hide behind подшивным ceiling or in a special vertical cabinets. Perhaps any (horizontal, vertical or inclined) the position of the fan in its installation. The main advantages of channel fan connected with its compactness with significant loss of air.

Fans Roof Radial (WRC)

Roof fans are mounted directly on the roof of the building, usually have a special frame to ensure durability and resistance to atmospheric influences. In connection with the fact that they are virtually the entire term of the service are located on the street to them are showed special requirements for water and dust resistance. Usually they are made of high-quality steel with epoxy коррозиестойким coated or galvanized. There are roof fans as for systems of General ventilation, as well as special high-temperature fans for high temperature systems, for example, the organization of extraction for the fireplace or gas boiler.

  • The fans of smoke removal
  • Installation of roof fans of smoke removal on the roof allows you to save the useful area of the building;
  • High reliability and the special design of the fans of smoke removal

The operation conditions of the fans of smoke removal:

Ambient temperature from minus 40 C to plus 40 degrees. Category of accommodation: the second – in moderate climate conditions, the first – in motor protection from the direct solar radiation, atmospheric precipitation for a moderate climate (according to GOST 15150-69)

Ducted fans

Fans channel are applied in systems of supply-and-exhaust ventilation of industrial and public buildings. They K – пактны and easily mounted in any position. Fans channel are designed to move невзрывоопасного gas with a temperature of no higher than 40-60 degrees C, containing solid impurities of not more than 100 mg/m3, not containing sticky substances and fibrous materials in the conditions of temperate climate of the 2-nd category of accommodation.

  • Conditions of operation of channel fans:
  • Ambient temperatures up to plus 40 degrees C
  • The advantages of the fans of the channel:
  • Compact design.
  • Built-in термоконтакты.
  • Installation in any position.
  • An opportunity of regulation of speed.
  • Does not require maintenance and reliable in operation.

Axial fans:

  • Small width
  • Are completed with electric motors with external rotor
  • The possibility of universal application
  • The speed can be adjusted from 100-0%

The appointment of

Industrial axial fans are used where it is necessary to submit a large number of air in the presence of small and medium-sized aerodynamic resistance. This is a natural choice when You need to make the ventilation in the building of the ordinary way.

Exhaust ventilation with the help of industrial axial fan is widely used in industrial, agricultural and other buildings.

Centrifugal

  • General exchange
  • Resistant to corrosion
  • Explosion-proof
  • Heat-resistant

Axial

Channel

  • Rectangular
  • Round
  • Roof

Modern industrial and domestic fans are powerful climatic modules that can perform several functions simultaneously and serve in this huge area. Industrial and domestic ventilation systems have a lot of modifications. Even more diverse spheres of application, in which a specialized model of industrial ventilation systems demonstrate excellent performance characteristics.

Depending on the application they include in their nomenclature the following types of equipment: axial, centrifugal, roof, channel devices, equipment, ventilation and some other varieties, used in chemical and oil-refining industry. Quality requirements are very high: the performance, sanitary characteristics, the maximum values of the pressure in the system, the maximum permissible level of aggressiveness of the transmitted gas medium, dimensions, as well as many other parameters to be considered in the selection of ventilation equipment for the specific of the climate system.

Channel fans (straight)

Are intended for installation in a duct of a round or rectangular cross-section. Fans of this type are installed on the same shaft with the electric motor in a single housing with the use of vibroisolation pads. The fan can be axial, многолопастным or radial, with blades curved both forward and backwards, one-sided or double-suction. Housing channel fans can be made of a special plastic material, of galvanized steel and even be mixed. Due to small overall dimensions of the duct fans can be installed directly in the network of air ducts, built-in channel systems of air conditioning and ventilation and hide behind подшивным ceiling or in a special vertical cabinets. Perhaps any (horizontal, vertical or inclined) the position of the fan in its installation. The main advantages of channel fan connected with its compactness with significant loss of air.